Click Here For Print Friendly Version

Date:               August 9, 2007 (Updated January 1, 2008)

Subject:          Installation and Testing of MLLD’s and ELLD’s

The focus and level of regulatory enforcement regarding the federal statute “Methods of Release Detection for Piping” (40 CFR 280.44) is increasing in many states. Since 1989, Vml requirements for Post-Installation and Annual Testing of Catastrophic Line Leak Detection for MLLD’s and ELLD’s has been met using the LDT-890 & LDT-890\AF Leak Detector Testers and protocol.  This test and equipment is specific to Vml MLLD and ELLD and is also applicable to any mechanical or electronic line leak detection system insofar as manufacturer guidelines do not exclude this method or equipment for generating catastrophic leaks. 

Manufacturer Certification and Training: Now more convenient, less expensive!

Vaporless Manufacturing, Inc. offers a comprehensive technician training, testing, and certification program online at www.vaporless.com.  Vml offers two types of online certification.  For individuals who do not test Line Leak Detectors, we offer an “Install and Replace  Vml MLLD” certification.  For testing technicians, we offer an “Operation of Vml LDT-890 Leak Detector Tester for Catastrophic Leak Test” certification.     

For each Vml LDT-890 or LDT-890\AF Leak Detector Tester purchased, the certification fees will be waived for two technicians.  Each technician may test and receive certification for “Operation of  Vml  LDT-890” and “Install and Replace  Vml MLLD.” Additional technicians may certify at the combined test price of $120.  Technicians installing leak detectors only may elect to test for “Install and Replace  Vml MLLD” for $50 per certification.

Each certification is valid for two years.  Certification for Operation of the LDT-890(\AF) is dependent upon a valid LDT-890(\AF) serial number. Also, for Vml  to issue certification for Operation of the LDT-890(\AF), the unit must have been factory recalibrated within the last two years. The charge for factory recalibration of an LDT-890(\AF) is $75, plus $15 freight, as long as no repairs are required.  A full policy statement regarding certification can be viewed at www.vaporless.com/tech cert toc.htm.   

For companies who test or anticipate testing in Biodiesel, ethanol, methanol, or any aviation fuel, we have introduced the LDT-890\AF.  The LDT-890\AF was built to ensure long service life, safety and accuracy when testing these aggressive fuels.  The cost is only slightly more than a standard LDT-890.  We also offer a retrofit upgrade from a standard LDT-890 to an LDT-890\AF for $850.  Everything except the case, panel, and stainless steel pressure gauges is replaced with more chemically resistant materials.  The AF retrofit also includes a new 18 month warranty (except for the pressure gauges). 

Please contact me if you have any questions.

Sincerely,

Gabe Messerly

Vaporless Manufacturing, Inc.

Last modified: November 15, 2008

Vaporless Manufacturing, Inc.

8700 E. Long Mesa Drive

Prescott Valley, Arizona  86314

E-mail:  vmi@vaporless.com

1-800-367-0185     Fax (928) 775-5309