Vaporless Manufacturing

99 LD-3000 Leak Detector

HomeProductsInstallationCertificationsTrainingTechnicalSales RepsRegulatoryWarrantyContact Us

99 LD-3000

Flow rates over 200 GPM • Application: 3 & 5 Horsepower Submersible Pumps

99 LD-3000 Leak Detector
Placeholder Image

New Certification Applicable With Any Pipe Configuration: Largest volume / longest line and now Certified for combination of rigid and flexible pipe up to 502 gallons.The 99 LD-3000 is certified for the following pipe: 1171 feet of 3” I.D. rigid pipe, up to 406 gallons; 260 feet of 3” I.D. flexible pipe, up to 96 gallons; 1431 feet combination of rigid and flexible pipe, up to 502 gallons.

Longest Guarantee: The 99 LD-3000 series shares the longest guarantee available in the industry with the VmI 99 LD-2000 and 99 LD 2200 series leak detectors. For 24 months after installation, the 99 LD-3000 is guaranteed to see a 3 GPH @ 10 PSI leak.

Now With Quick Purge Line Feature: At installation, the 99 LD-3000 is open, ready to purge the line system. After line is purged, one screw is removed to enable leak detection function.

Electronic Line Leak Detection Upgrade! The 99 LD-3000 may be upgraded in the field to eliminate thermal induced slow-flow, provide submersible shut-down, and alarm notification to site monitoring equipment. Request information on the ISM-4080, an easy upgrade for existing or new installations. The ISM-4080 also stages turbines and controls solenoid valves for loading racks and marine applications. If there is no need for staged turbines, solenoid valve control, alarm notification or submersible shut-down, request information on the ARM-4073 to eliminate false alarms only.

Field Adjustable Leak Threshold: All Vmi mechanical line leak detectors have been factory assembled and tested to meet the EPA leak detection threshold established during certification testing. Abnormal field conditions such as high line resiliency (high bleed-back), pump pressures over 40 PSI and high head pressures affect line leak detection sensitivity. Additionally, wear affects performance of leak detection over time. To meet these issues, Vmi established through certification testing, the ability of field technicians to adjust Vmi mlld’s to compensate for field variables and normal wear. Please read Technical Bulletin 032805 for specific instructions on this feature.

*See Technical Specifications on back under fuels.
**Contact factory for details

U.S. Patent No. 4,966,190  •  Designed and Manufactured in U.S.A.

Placeholder Image
Click or Tap Here to View or Download the Full Brochure with Specifications in PDF Format
Please note that the PDF Brochure opens in a new window.
Placeholder Image
Back to Top

Copyright © 2016 - Vaporless Manufacturing, Inc - All Rights Reserved - Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or trademark holders.